From Bioblast
TIP2k-Module
Description | TIP2k-Module - Titration-Injection microPump (TIP2k) for two-channel operation with the O2k-FluoRespirometer with automatic control by DatLab of programmable titration regimes and feedback control (oxystat, pH-stat). The TIP2k-Module includes TIP2k-Accessories: 4 Microinjection syringes, 1 Pkg. TIP2k-Needle Spacers with mounting tool, 1 TIP2k-Needle Safety Support and 1 Pkg. TIP2k Filter Papers. |
---|---|
Product ID | 11100-02 |
Type | O2k, O2k-Module, Microsyringe, O2k-FluoRespirometer |
Link | MiPNet12.10 TIP2k-manual, MiPNet04.05 Titration-Injection |
Image |
MitoPedia O2k and high-resolution respirometry:
O2k hardware
TIP2k-Module consists of:
O2k with TIP2k
- Β» TIP2k-Manual
- The TIP2k is fully supported by the O2k.
The TIP2k is placed at the top of the Oroboros O2k. It does not need any extra bench space.
- Align the front legs of the TIP2k with the TIP2k-Spacer Bar on the front of the O2k if you use 200 Β΅l syringes.
- Align the rear ends of the TIP2k and O2k, if you use 500 Β΅l syringes.
TIP2k-Syringes
- For larger volumes, the 500 Β΅l syringes are available.
- Β» SOP: Handling microsyringes
- Rinse the outside with water immediately after use.
- Wash 3 x with last used solvent, rinse with EtOH.
- Storage: ethanol (short), dry (longtime).
- Rinse with pure solvent before use.
- Technical support: TIP2k syringe blocked