Oxygen signal not responding: Difference between revisions
From Bioblast
No edit summary |
|||
Line 1: | Line 1: | ||
{{Technical service}} | |||
==Problems== | ==Problems== | ||
*The oxygen signal remains at or close to zero even at high oxygen levels. | *The oxygen signal remains at or close to zero even at high oxygen levels. | ||
Line 13: | Line 16: | ||
{{#set: Technical service=O2 sensor|Technical service=O2 signal}} | {{#set: Technical service=O2 sensor|Technical service=O2 signal}} | ||
[[Category:Technical service]] | |||
__SHOWFACTBOX__ | __SHOWFACTBOX__ |
Revision as of 16:50, 13 February 2015
Problems
- The oxygen signal remains at or close to zero even at high oxygen levels.
- The signal at air saturation is abnormally low.
Test and Solutions
The oxygen signal is very low at air saturation and less responsive than expected.
- Solution 1: Check the gain setting for the affected oxygen channel.
- The gain setting was too low, and the oxygen signal increases to the expected level after increasing the gain.
- The gain was correct: Locate the problem using the procedure described in Locating a problem and Sensor test.