Gain

From Bioblast
Jump to: navigation, search
Bioblasts - Richard Altmann and MiPArt by Odra Noel
MitoPedia         Terms and abbreviations         Concepts and methods         MitoPedia: SUIT         MiP and biochemistry         Preprints and history



MitoPedia

Gain

Description

The gain is an amplification factor applied to an input signal to increase the output signal.

Template NextGen-O2k.jpg
O2k-Open Support


MitoPedia O2k and high-resolution respirometry: O2k-Open Support 

Gain: O2 channel of the O2k

For most applications between 25 and 37 °C the pre-set gain of 1 (default) is adequate and does not have to be changed.
The gain of the signal of the O2 channel can be adjusted in DatLab by selecting [Oxygraph-2k] / [O2k Control] from the menue. When the gain setting is too high for any given signal, it will reach a constant maximum value of 10 V (often displayed as 9.99 V) and the displayed slope will therefore apparently be constant at zero.
MitoFit-QCS


For each gain setting a separate calibration of the oxygen signal is required. Therefore, after changing the gain you should not only perform a calibration at air saturation (as always before an experiment), but also a new zero calibration, see also Air calibration. If for any reasons you frequently switch between gains, the easiest way is to store the calibrations in different DatLab files and use the "read from file" function in the calibration window. Alternatively, values can be entered manually.
Oxygen signals that have been obtained after proper calibration are independent of the gain setting. Therefore oxygen concentrations (and fluxes) that have been recorded at different gain settings can of course be used together.
See also »Oxygen signal

Gain: pX channel of the O2k

Gain: NO channel of the O2k

MitoPedia O2k and high-resolution respirometry: O2k hardware, DatLab