POS-Seal Tip: Difference between revisions
From Bioblast
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
|description='''OroboPOS-Seal Tip''', black butyl rubber gasket with 3 mm pore. 4/Pck, for sealing the [[OroboPOS]] (sensor head) against the [[O2k-Chamber]]. Push the wetted OroboPOS-Seal Tip over the POS-sensor head, with the pore positioned centrally, not covering any peripheral area of the gold cathode. Do not stretch the gasket across the POS-sensor head. | |description='''OroboPOS-Seal Tip''', black butyl rubber gasket with 3 mm pore. 4/Pck, for sealing the [[OroboPOS]] (sensor head) against the [[O2k-Chamber]]. Push the wetted OroboPOS-Seal Tip over the POS-sensor head, with the pore positioned centrally, not covering any peripheral area of the gold cathode. Do not stretch the gasket across the POS-sensor head. | ||
One pack (4 seal tips) of this product is a standard component of the [[OroboPOS-Service Kit]] | One pack (4 seal tips) of this product is a standard component of the [[OroboPOS-Service Kit]]. | ||
|product id=26110-01 | |product id=26110-01 | ||
|product type=O2k, OroboPOS, OroboPOS-Service Kit | |product type=O2k, OroboPOS, OroboPOS-Service Kit |
Revision as of 13:30, 1 August 2017
POS-Seal Tip
Description | OroboPOS-Seal Tip, black butyl rubber gasket with 3 mm pore. 4/Pck, for sealing the OroboPOS (sensor head) against the O2k-Chamber. Push the wetted OroboPOS-Seal Tip over the POS-sensor head, with the pore positioned centrally, not covering any peripheral area of the gold cathode. Do not stretch the gasket across the POS-sensor head.
One pack (4 seal tips) of this product is a standard component of the OroboPOS-Service Kit. |
---|---|
Product ID | 26110-01 |
Type | O2k, OroboPOS, OroboPOS-Service Kit |
Link | MiPNet12.06 |
Image |